Double Glazing Seal Repairs
If the seals of double glazing windows have been damaged they could cause damp and mould. This can damage the frame and wall surrounding it and can affect your health.
Resealing is a cheaper way to repair the majority of uPVC window frames rather than replacing them. A glazier will typically clean the window frame and glass, apply a new bead of sealant and smooth it.
Water Leaks
Window seals are designed to keep water from your home. When they begin to wear out, water can be leaking around your windows. A window that leaks isn't only a nuisance but can cause significant damage to the surrounding structure of your home. It is essential to recognize the problem early and get it repaired by an expert before it gets any worse.
The source of leaking windows can be found in the glass but on the frame or sill. This is the most common sign of a leaky seal. It may be caused by damage to the window seal from weather or aging, worn-out caulking or even a blocked drainage section resulting in the accumulation of water or ice.
Another sign of a failing window seal is water appearing between the panes of your double-glazed windows. While this isn't quite as hazardous as a leak since the water doesn't travel enough to enter your home. However, it could indicate that the inert gas that is sandwiched between the panes has lost its lubrication, which will lower the insulation value of your windows.
The last sign of a failed window seal is condensation between the panes. This could be caused by the seal being damaged or a damp environment in your home. It could also be a issue with the glass. It's not just annoying but it can also cause mold and mildew growth in your home. This can be a challenge and expensive.
If you're noticing these signs, it's time for an examination of your double-glazed windows. Repairs or replacements will help protect your home from water leaks, reduce the cost of energy, and also stop drafts. It's a small cost to pay for the security and comfort of your family. Contact Thompson Creek Window to discuss your options regarding window seal replacement or repair. Our knowledgeable professionals are ready to assist! We serve homeowners throughout the Mid-Atlantic region.
Condensation
A damaged double-glazing seal could let water in the space that is insulating. This can lead to fogging or misting to the window panes.
If you are noticing condensation inside your home It's time to call a double glazing repair company. Condensation is a sign that the vacuum seal drawn at the factory has been damaged and moisture is getting into the insulated gap.
Condensation can be caused by a number of causes, but it's most commonly a result of gaskets that are not properly fitted or sealants, or insulation in the uPVC frame of the windows. As a result there are different double glazing seal repair options but it is essential that the new seal is correctly measured to ensure a perfect fit and a water-tight seal.
Gaskets are typically made from polyurethane. It is a material that can be used to seal gaps between double-glazed units. These are designed to last for a long time but they can perish as time passes due to natural wear and tear and exposure to various temperatures and weather conditions throughout the year.
As time passes the foam can shrink or crack over time. This can lead to a break in your seal, allowing moisture to enter the double-glazed window. This can result in condensation and a decrease in energy efficiency.
One option for fixing this problem is to have the windows resealed. This is not a guaranteed solution since it will only remove the existing condensation and not address the issues that cause the double-glazed window to leak or form condensate.
Another option is to have your windows replaced completely. This should be handled by a professional who offers an insurance backed guarantee. If the company fails, you're still covered by insurance. It's worth mentioning that the warranty for your replacement windows must be at least 10 years.
Misting
As the autumn months approach, it's a good idea ensure that your double-glazing seals are in good condition. Seals that have damaged can affect your windows' insulative properties, but also cause dampness, mold and condensation. It is crucial to fix any issues in your double-glazed windows as soon as you can to avoid further damage and save money on energy bills.
Double-glazed windows are made of two glass panes which are joined by a gas-filled inner space. The sealant layer on the outside fills in the gap between the uPVC frames and the glass. This is vital to ensure the airtight seal that keeps cold and warm air separated in your home, saving you money on your heating bill. These seals can become damaged as time passes due to the weather, aging, or poor installation. Once this happens the encapsulation formula that makes double glazed windows so effective can begin to lose its effectiveness.
If not checked or unchecked, damaged or defective seals can cause condensation and damp which will not only ruin the appearance of your windows but could also affect your health. Moisture and dampness can cause damage to walls, ceilings floors, and other surfaces within your home. They can also cause allergens and irritants that can be harmful to your health as well as the health of your family.
One of the most frequent problems that can happen to your double glazing is misting between the panes. This occurs when moisture gets in the insulated part of your windows. It isn't easy to fix without professional double-glazing repair.
There are DIY methods of tackling this problem, however, we'd advise against it as it's not only risky but can be extremely dirty and damage your windows. These methods involve drilling holes into your glazed unit and using chemicals to get rid of fog and condensation. This can lead to a number of complications including exposing your windows to water damage that could cause the entire unit to be destroyed.
Professional glaziers possess the knowledge, tools and experience to effectively reseal your uPVC frames and provide you with lasting results. Additionally, they can also offer advice on the best ways to maintain your uPVC windows to prevent future problems.
Draughts
A draft coming from your window is an indication that the sealant has failed and must be replaced or repaired. This will prevent cold air getting into your home, increase efficiency in energy use and lower heating bills and make a difference to comfort levels and indoor temperature control.
It is important to note that some draughts are not caused by the window seals but rather from the gap between the frame of the bricks. In certain cases it is possible to repair this by filling the gap with silicone caulk. If this does not work, it will require having the seal professionally repaired.
When the sealant on double-glazed windows begins to fail and allows water to infiltrate. This can result in damp or even mold. This can affect your health and can be very damaging to your property. If double glazing repairs near me notice any problems with water intrusion, you should address them as soon as possible. If your windows are still covered by a warranty It is worth checking to find out if the company that sold them will pay for the cost.
The windows themselves are typically covered by a guarantee that can be 10 years or more, but some businesses offer lifetime warranties - so it is worth taking a look. If your double-glazed windows fall under warranty, you must contact the company that sold them as fast as you can and inform them about any issues you're experiencing. It is recommended to make this contact in person or via letters and emails, to ensure everything is recorded and clear.
It is also worth noting that draughts are usually caused by defective hinges, not the lack of seals that are effective. The hinges are located close to the window sash which is the part you open. If they're not regularly oiling them, they can become stiff. This can cause a gap to form between the sash frame and the sash, allowing cold air to enter the house. This issue can be fixed by replacing the hinges, without impacting window seals.